PROTIM® Timber Protection

Pressure treated to resist insect attack and decay fungi

PROTIM® products from Koppers represent a range of low pressure and canned products for the protection of construction and joinery timbers. The PROTIM technology is tried and tested with a proven history of protecting timber products from insects and decay fungi.

PROTIM® is an effective preservative formulation offering enhanced protection and long-term service life. Available for many interior and exterior timber components, the PROTIM formulations are available as a clear product, or in a range of colours.

Typical uses include:

  • Roof timbers
  • Timber framing
  • Interior and exterior joinery
  • Interior and exterior timber components which are installed above ground*

* PROTIM treated timber used in exterior applications could require application of a suitable topcoat product. See product literature and website for details.

Available for the following use categories

  1. Above ground, covered. Permanently dry, insect risk.
  2. Above ground, covered. Occasional risk of wetting.
  3. Above ground, coated. Exposed to frequent wetting.

The low pressure preservative formulation is applied by a computer controlled vacuum process. This treatment process allows the wood to maintain its original size, shape and strength. PROTIM preservative treated timber requires no kiln drying after treatment.

PROTIM BENEFITS

  • PROTIM is an effective preservative treatment.
  • PROTIM offers preservative protection against wood boring beetles, and decay fungi.
  • PROTIM pressure treated timber is cost effective and affordable.
  • Pressure treatment can extend the service life of timber projects.
  • Pressure treatment allows the use of naturally sustainable plantation grown softwoods.
  • PROTIM pressure treated timber is widely available NOW.

BUILDING TIPS

USE A CUT-END PRESERVATIVE

All timber products should be treated in their final shape and form. Any surface exposed by drilling or cutting must be retreated with a suitable cut-end preservative, such as PROTIM WB 7 Endcoat.

NAILS, FASTENERS AND FITTINGS

Use fasteners and other hardware which are in compliance with building codes for the intended use. Follow manufacturer’s instructions.

COATINGS

Whatever finish you use, always check the label of the product and follow the manufacturer’s instructions.