Introducing Fundo Thermo

Passive House Institute-certified heat recovery, built into a waterproof, ready-to-tile shower system. What if heat recovery wasn’t another component to specify, but part of the shower floor itself? For UK housebuilders working to reduce energy demand, domestic hot water is an important consideration. Every shower sends warm wastewater down the drain, carrying thermal energy that could be put to better use.

Fundo Thermo offers a different approach: a ready-to-fit shower element combining factory-integrated drainage with wastewater heat recovery. The technology becomes part of the shower specification from the outset, rather than an additional plumbing component.

How it works

Fundo Thermo recovers up to 50% of the heat from outgoing shower water, using it to preheat the incoming cold-water supply. Inside the integrated heat exchanger, the two water circuits remain completely separate, allowing heat to transfer without the water ever mixing. The process works passively, without electricity, pumps or moving parts. The preheated fresh water then reaches the shower mixer, reducing the energy needed to achieve the desired temperature. By reducing demand on the water-heating system, Fundo Thermo can help lower hot-water running costs and associated operational carbon emissions. Actual savings depend on the hot-water system and shower usage.

Fewer components. Familiar installation.

This integration reduces the number of separate components to coordinate on site. Positioned directly beside the drain, the heat exchanger captures warmth from wastewater close to its source, potentially limiting heat loss through additional pipework that may be required with a separately installed unit.

With no standalone heat exchanger to position beneath the shower, installation follows familiar wedi Fundo principles. The element is suitable for timber and screed floors and can be cut to size in accordance with wedi’s instructions. For homeowners, the discreet, 35 mm-wide shower channel combines a minimalist finish and effective drainage with an integrated hair trap that simply lifts out for easy cleaning. Despite the built-in heat recovery, upkeep requires no more than normal shower care. A deeper clean using a non-corrosive drain cleaner is recommended twice a year.

Independently verified performance

Fundo Thermo is certified by the Passive House Institute as a drain-water heat recovery component (class phB). Under the Institute's defined test conditions — a six-minute shower at 8 l/min — the system achieved a 44% reduction in useful energy demand for the shower.

This differs from the up-to-50% heat-recovery figure based on Kiwa testing. While the latter refers to the proportion of heat recovered from wastewater, the 44% figure describes the reduction in useful shower energy demand. Neither represents a reduction in total household energy consumption.

Together with its listings in the UK SAP Product Characteristics Database for systems A, B and C, Fundo Thermo’s independently verified results provide housebuilders andspecifiers with a solid technical basis for specifying the system in new-build developments and bathroom refurbishments. Discover how Fundo Thermo can support your next development.